The importance of rainwater harvesting system to industrial industry
Water is unarguably one of the most vital resources to sustain life on our planet. Other than being used as drinking water, water is also used for various domestic purposes such as washing and cleaning. Besides that, water also contributes a vital part in modern day industrial operations. They are fundamental components in cooling equipment and irrigation as well. Despite the fact that most of our planet is covered by water, drinkable and usable fresh water is actually significantly less. This is why rainwater harvesting systems in Malaysia play a vital part to ensure sustainable development of the industrial sector.
Cheaper water bills
One of the most obvious reasons to installing a rainwater harvesting tank in Malaysia is to save up on water bills. Many major companies use a significant amount of water for non-drinking purposes such as cooling, toilets and irrigation. Most rainwater harvesting equipment is installed alongside a rainwater filtration system. This treats and filters the water so that it can then be used in a variety of purposes. Being a tropical country, Malaysia experiences plenty of rainfall throughout the year. This means that there is more than enough rainwater to fill up those harvest tanks to be treated and reused. By doing so, companies and factories will be less dependent on commercial water suppliers and thus cutting down significantly on water bills. All of this means that you can reduce operational costs and enjoy higher profit margins which will definitely put a smile on the face of your investors.
While modern development has raised the standards of our daily lives, it does require massive amounts of resource. With fresh water supplies depleting rapidly, it is more than likely that there will be a time where our water supply can no longer support our demands anymore. It is now time for us to take the initiative to promote a sustainable and environmentally friendly way of living. Most industrial usage requires only non-drinkable water. Recycled rainwater can be an effective method for factories to cut down on fresh water demands. In Malaysia, rainwater harvesting systems can play a huge role to reduce water consumption and wastage. Many governments now require industrial companies and factories to incorporate environmentally sustainable approaches in their daily operations. Some even offer incentives such as tax reduction as an effort to drive sustainable development.
Better for your equipment
Most commercial fresh water supplies are treated with chemicals and may contain minerals such as calcium and magnesium. This “hard” water has adverse effects on industrial operations. If you are using it as a coolant, precipitation of hard water may eventually build up mineral deposits or scales that will lower the cooling efficiency or even directly harm your expensive equipments. Harvested rainwater is mostly free of these harmful chemicals and dissolved minerals. After filtration for hygienic purposes, they are much safer and better for your equipments in the long run. Even only using hard water for plumbing purposes can also pose problems. The same minerals may also build up along the walls of the pipe which may reduce water flow. In the long term, this may cause clogging and eventually you would have to replace the damaged pipes. Again, harvested rainwater can be used for non-potable uses such as flushing.
Independent water supply
Many factories are set up in areas that are isolated or at least a significant distance away from populated towns and cities. Setting up an industrial operation requires massive groundwork to be done such as laying down cables, pipelines and more. Feeding fresh water supply to an isolated factory is no easy feat and can be extremely costly as well. By using a rainwater harvesting system, factories can basically have their own backup water supply. This can be very useful especially during times where water supply is low. When coupled with grey water harvesting systems, storing your own rainwater and keeping your own backup reservoir can make sure that your factory keeps running even during times of drought.
Easy installation and maintenance
Modern rainwater harvesting systems are easy to install and maintain. They are usually an underground tank that collects runoff water from rooftops or drains. In most cases, they are installed alongside a basic rainwater filtration system for optimal usage. Most of the time, they can just be left on their own and will require only maintenance. For industrial grounds that cover a large area, the harvesting process can be extremely fast and efficient due to the extra real estate available. All of this means that the initial cost of installation is quickly negated by the substantial amount saved for the water bills. Nowadays, there are many rainwater harvesting system suppliers in Malaysia. Hiring professionals with the necessary technical knowledge will make the entire process quick and hassle-free.
Rainwater harvesting is now becoming a popular choice for both residential and commercial usage. Bring both cost effective and sustainable, it is no surprise that many are now actively seeking to implement rainwater harvesting systems in Malaysia. Companies like MyHomePalm Integrated Sdn Bhd are renowned rainwater harvesting system suppliers in Malaysia. They have extensive experience in setting up some of the most impressive systems all over the country. If you too wish to implement your own rainwater harvesting system, it always helps to talk to the experts with the appropriate technical know-how. Save the environment, and you can save up on a couple of bucks while doing it as well.